CCJLG - P/N 8360 ULTRAPRO FLEX PAK URETHANE SEALER - WHITE
- MSDS: CCJLG
- Manufacturer: MINNESOTA MINING AND MFG CO AUTOMOTIVE TRADES DIV
- Product Name: P/N 8360 ULTRAPRO FLEX PAK URETHANE SEALER - WHITE
- National Stock Number: 8030-00D020039
Product Identification
Product ID:P/N 8360 ULTRAPRO FLEX PAK URETHANE SEALER - WHITE
MSDS Date:04/29/1992
FSC:8030
NIIN:00D020039
MSDS Number: CCJLG
Responsible Party
ST PAUL, MN 55144-1000
US
Emergency Phone: 612-773-1110
Info Phone: 612-733-1110
Cage: 52157
Contractor
Telephone: 414-255-5520
Cage: 050Q3
Ingredients
POLYMERIC THIXOTROPE NJ TRADE SECRET RN02944800-5011P
Fraction By Weight: 25-30%
PLASTICIZER NJ TRADE SECRET RN02944800-5010P
Fraction By Weight: 20-25%
POLYURETHANE PREPOLYMER
CAS: 68877-65-6
Fraction By Weight: 15-20%
METAL SALT NJ TRADE SECRET RN02944800-5012P
Fraction By Weight: 2-5%
XYLENES (O-,M-,P- ISOMERS) (SARA 313) (CERCLA)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 3-5%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM/150STEL;9596
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CALCIUM OXIDE
CAS: 1305-78-8
RTECS: EW3100000
Fraction By Weight: 1-2%
OSHA PEL 5 MG/M3
ACGIH TLV: 2 MG/M3; 9596
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 1-2%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9596
METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA 313)
CAS: 101-68-8
RTECS: NQ9350000
Fraction By Weight: <0.5%
OSHA PEL C 0.02 PPM
ACGIH TLV: 0.005 PPM; 9596
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EXPOSURE MAY CAUSE EYE &
RESPIRATORY TRACT IRRITATION. INGESTION MAY CAUSE GI TRACT
IRRITATION. CHRONIC: PROLONGED OR REPEATED EXPOSURE MAY CAUSE
ALLERGIC RESPIRATORY REACTION; SKIN IRRITATION/ ALLERGIC SKIN
REACTION.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:EYES-IRRITATION, REDNESS, SWELLING, PAIN,
TEARING, HAZY VISION. SKIN-IRRITATION, REDNESS, SWELLING, ITCHING.
INHALED-IRRITATION, SORENESS OF THROAT/NOSE, COUGHING, SNEEZING.
INGESTED-VOMITING, NAUSEA, ULCERATION, DIARRHEA, CONSTIPATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:IN ALL CASES GET MEDICAL ATTENTION. EYES-FLUSH WITH WATER FOR
15 MINUTES. SKIN-FLUSH WITH LOTS OF WATER. INHALED-REMOVE TO FRESH
AIR. INGESTED-DO NOT INDUCE VOMITING! IF CONSCIOUS, DRINK 2 GLASSES
WAT ER. CALL A PHYSICIAN.
Fire Fighting
Flash Point Method:CC
Flash Point:92.0F,33.3C
Lower Limits:1.27
Upper Limits:7.00
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL FIRE FIGHTER'S PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NONE EXPECTED.
Accidental Release
Spill Release Procedures:OBSERVE PRECAUTIONS FROM OTHER SECTIONS.
COLLECT SPILLED MATERIAL, PLACE IN A US DOT-APPROVED METAL
CONTAINER AND SEAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. KEEP
OUT OF REACH OF CHILDREN. USE IN A WELL-VENTILATED AREA. AVOID SKIN
CONTACT. AVOID EYE CONTACT.
Other Precautions:PROTECT FROM MOISTURE. KEEP AWAY FROM HEAT, SPARKS
AND OTHER SOURCES OF IGNITION. DO NOT INGEST. AVOID PROLONGED
BREATHING OF PRODUCT.
Exposure Controls
Respiratory Protection:AVOID PROLONGED BREATHING OF VAPORS.
Ventilation:USE IN A WELL-VENTILATED AREA.
Protective Gloves:AVOID SKIN CONTACT.
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:F4
Spec Gravity:1.190
Evaporation Rate & Reference:<1.00 (ETHER=1)
Appearance and Odor:GRAY PASTE; AROMATIC ODOR.
Percent Volatiles by Volume:5
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:OPEN FLAME, HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE,
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS. EPA/RCRA HAZWASTE NUMBER D001
(IGNITABLE). INCINERATE AFTER MIXING WITH A FLAMMABLE MATERIAL IN
AN INDUSTRIAL OR COMME RCIAL FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.